-Now 1/4" thicker to improve heat dissipation even further!!!
-Optional V-band Clamp option for those who would like to have a dedicated clamp.
The 3" v-band purge caps can be used on all 3" v-band flanges. Not only are they a simple back purging solution, they also act as a heat sink. They pull heat from the V-band flange, eliminating warping of the flange, so they stay nice and flat. Simply clamp them on, hook up your hose, and your ready to start back purging. Doesn't get any easier then that.
Now comes standard with internal diffuser, to distribute the argon smoothly and more evenly through the tube/pipe. You can see in the pictures, a smoke test we did with and without a diffuser. Its smooths out the argon flow and spreads it evenly exactly where you need it.
They can be used for exhaust systems, intercooler pipes, or any other tube/pipe you are fabricating that's with in the 3" v-band flange. Can also be used for sanitary welding, the uses are endless. Time to keep the aluminum foil in your kitchen where it belongs and start saving yourself time and money in wasted argon gas and maximize profitability.
(1) 1 machined aluminum tapered purge plug1
(1) 1/8" NPT male vent fitting
You will need to purchase the 10' 9mm Female Quick Connect Back Purge Hose 5/8-18 RHM (part# 9mmfqdbph) and 9mm Quick Disconnect Male to 1/8 NPT Male Adapter for purge kit adapter part# 9mmmqd18nptm separately.
----Benefits of our Purge Plugs----
-Quick and easy install and removal, saving you time and money.
-The wrench flats at the top of the plug are the single most important and beneficial part of our purge plugs. Unlike other purge plugs we have incorporated tall wrench flats at the top of the plug. These flats allow the plug to be removed with ease. For removal, you can either tap the side of the flats, or use a wrench to twist them out. Without the flats, plugs can be near impossible to remove. You will end up hammering to top edge of the plug to remove and cause damage to the plug. This will drastically decrease the life of the plug, and waste time. Isn't the whole purpose of purchasing purge plugs to make life easier? Metals like stainless steel shrink when welded, which can really clamp down on a purge plug making it difficult or impossible to remove. Not with our purge plugs, the flats eliminate this issue, giving you more time to focus on your next weld instead of how you are going to remove a purge plug.
-The flats not only allow you to easily remove the plug, they also allow you to hold the material in a vise, positioner, or any type of clamping fixture. This allows you to easily position the work piece as needed.
-Our plugs will Not melt. Weld as close to the plug as needed, and never have to worry about the plug melting.
-Act as a heat Sink, pulling heat away from what you are welding.
-Keeping the pipe or tube nice and round. When welding close to the edge of a pipe or tube, you can end up deforming or ovaling the end. Since our purge plugs are aluminum, it keeps the end of the tube/pipe nice and round. You will appreciate this when you are welding the next section and there are not gaps due to the deforming of the pipe or tube. We have even used these to make tube round, when they are not round right out of the package.
-Internal diffusers, now standard on all of our back purging products (only optional with our .5"-1" purge plugs).
-Smoke testing for automotive or welding use. These can be used to smoke test intake/exhaust systems to find leaks. These can also be used for smoke testing and checking welds for pin holes, cracks, etc...
-Our purge plugs will outlast any other plugs on the market. Even as the plugs wear over time (which last a very long time) they can be reconditioned. Since they are made of aluminum, this gives you the ability to recondition the plug/cap for even further use
-Made for welders, by welders. We are not only a seller of these back purging products, we use them daily as well. Meaning whenever we see a way of improving our products through our own use, that is exactly what we do. We have updated and improved just about every size since we first offered these products years ago. We have added internal tapers, internal diffusers, additional thickness to our v-band purge caps/heat sinks, as well as other small improvements. All of these improvements are to bring you the best possible product. That is the difference from a company that just manufactures a product, to a company who uses their own products daily. Trust you are getting the highest quality, and most extensively tested back purging products on the market.
One of our customers, Strictly Modified, who uses the HTP Invertig 221 to build performance parts, designed our Purge Plug Kits. Our Purge Plug Kits have been in development for months, in order to determine the best sizing per plug, along with the best taper angle for bite and ease of installation and removal. For easier removal, we machined flats on the top of each plug so you can quickly remove them with the twist of a wrench. With one of our Purge Plug Kits, you will no longer waste Argon or have to mess around with tin foil.
The 3" v-band purge cap works on all 3" v-band flanges. The thickness of the cap also allows it to act as a heat sink. You can use the cap on exhaust systems, inter-cooler pipes, or any other tube/pipe with a 3" v-band flange.
Our purge plugs work excellent anywhere back purging is needed and are great for sanitary welding. You can use our purge plugs for manifold fabrication, collectors, dump tubes, and even wastegate flanges. Keep the tin foil in the kitchen where it belongs, save set up time and money in wasted Argon, and maximize your productivity. Simply tap them in and you are good to go!
(1) 3" machined aluminum v-band purge cap
(1) 1/8" male to 9mm female quick connect
(1) 9mm male quick connect with 3/16" barb
(1) 1/4" NPT male to 1/8" NPT female adapter
(2) Hose clamps
(1) NP-72 standard "B" Argon fitting
(1) 5/8"-18 male nut
CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.