EDGE® #12 gas lens Pyrex cup with 1/8" diffuser for 9 and 20 Series TIG torches. Cup measures 0.75" x 0.75" x 1".
EDGE Welding Supply Pyrex Cup Recommendations:
♦ The EDGE adapter and EDGE cup must be fully seated onto the Teflon heat/thermal shield.
♦ For use with DC only and up to 180A unless using pulse settings.
♦ Best used with metals such as Stainless Steel, Titanium, Inconel, Nickel based, and thin aluminum based.
♦ Recommended for use with 1/16", 3/32", and 1/8" tungsten. The 1/16" diffuser must not exceed 90A DC because of potential damage to the diffuser.
♦ The tungsten can be extended out of the cup, up to 3", for clearance in a controlled environment.
♦ The 'walking the cup' technique is not recommended with Pyrex cups (walking the cup causes premature cup failure).
CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.