Description:
EDGE® #12 narrow gas lens Pyrex cup with 3/32 diffuser for 9 and 20 Series TIG torches. Cup measures 0.5" x 0.5" x 1".
EDGE Welding Supply Pyrex Cup Recommendations:
♦ The EDGE adapter and EDGE cup must be fully seated onto the Teflon heat/thermal shield.
♦ For use with DC only and up to 180A unless using pulse settings.
♦ Best used with metals such as Stainless Steel, Titanium, Inconel, Nickel based, and thin aluminum based.
♦ The tungsten can be extended out of the cup, up to 3", for clearance in a controlled environment.
♦ The 'walking the cup' technique is not recommended with Pyrex cups (walking the cup causes premature cup failure).
EDGE Welding Supply Pyrex Cup Recommendations:
♦ The EDGE adapter and EDGE cup must be fully seated onto the Teflon heat/thermal shield.
♦ For use with DC only and up to 180A unless using pulse settings.
♦ Best used with metals such as Stainless Steel, Titanium, Inconel, Nickel based, and thin aluminum based.
♦ The tungsten can be extended out of the cup, up to 3", for clearance in a controlled environment.
♦ The 'walking the cup' technique is not recommended with Pyrex cups (walking the cup causes premature cup failure).