Description:
EDGE® #6 EXP mini collet body Pyrex cup kit for 17, 18, and 26 Series TIG torches. Includes the following parts:
EDGE Welding Supply Pyrex Cup Recommendations:
♦ The EDGE adapter and EDGE cup must be fully seated onto the Teflon heat/thermal shield.
♦ For use with DC only and up to 180A unless using pulse settings.
♦ Best used with metals such as Stainless Steel, Titanium, and Inconel.
♦ The #10 EDGE Pyrex cup can be used to weld aluminum based material, but only in short runs.
♦ Can be used with any size and type of tungsten.
♦ The 'walking the cup' technique is not recommended with Pyrex cups (walking the cup causes premature cup failure).
Part# | Description | Quantity |
CB920-P6 | EDGE® #6 Collet Body Pyrex Cup | 1 |
CB920-A | Adapter | 1 |
PYR17SC18 | 1/8" Wedge Collet, Short | 1 |
4CB418 |
1/8" Stubby Collet Body | 1 |
13N10 |
#6 Alumina Cup | 1 |
300S | Short Back Cap | 1 |
CB920-OR | Adapter O-Ring | 2 |
EDGE Welding Supply Pyrex Cup Recommendations:
♦ The EDGE adapter and EDGE cup must be fully seated onto the Teflon heat/thermal shield.
♦ For use with DC only and up to 180A unless using pulse settings.
♦ Best used with metals such as Stainless Steel, Titanium, and Inconel.
♦ The #10 EDGE Pyrex cup can be used to weld aluminum based material, but only in short runs.
♦ Can be used with any size and type of tungsten.
♦ The 'walking the cup' technique is not recommended with Pyrex cups (walking the cup causes premature cup failure).
a