-->Skip to content
Don't let the small size fool you—the MicroCut™ 600 is a real workhorse. It's 40 amps of power allows you to cut 1/4" steel at over 20 in/min, 3/8" at over 10 in/min, and 1/2" at 5 in/min! But it's small size (15" L x 6" W x 12-1/2" H) and light-weight design (22 lbs) means you can take this powerhouse anywhere, and inverter technology means it's energy efficient—the MicroCut 600 only needs 30 amps of 220 volt power!
Infinite amperage adjustment lets you keep the raw cutting power of the MicroCut 600 under control. Dial the current down to 10 amps to perform precise cuts on thin gauge sheet metal. Crank the power up to 40 amps for serious frame fabrication and bracket building. Whatever project you need to tackle, the MicroCut 600 is up to the task! And whether it's steel, stainless steel, aluminum, or any other metal that conducts electricity, the MicroCut 600 will cut through it like a hot knife through butter.
The 13' plasma torch feature our new "shoulder contact" electrode and cutting tip for longer consumable life. This tip design means the MicroCut 600 starts the arc instantly without high frequency so you can start your arc right through rusty and painted metal, while reducing the possibility of damaging on-board computer or any other sensitive electrical equipment you might be cutting near.
And like all HTP equipment, we back the MicroCut 600 with our 30-day, money-back guarantee—try the machine in your shop for 30 days, if you don't like the way it cuts, we will take it back no questions asked. And, further, we back the machine with a one-year warranty and free shipping anywhere in the contiguous United States. Made in Italy.
|Cutting Current||10 to 40A
|Open Circuit Voltage||350V|
|Quality Cutting Capacity||3/8" @ 10"/Min.|
|Severance Cutting Capacity||1/2" @ 5"/Min.|
|Duty-Cycle||20% @ 40A|
|Dimensions (Length x Width x Height)||15" x 6" x 12-1/2"|
|Cutting Torch Length||13'|
|Input Power Cord Length||7'|
|Plasma/Cooling Gas Pressure||60 to 70 PSI|
|Plasma/Cooling Gas Volume||3.5 CFM|