MIG Welding Gun of Your Choice (An Upgrade Charge Applies When You Select 26 Series MIG Gun f/Welding Aluminum), 10' Ground Clamp, 6' Gas Hose, Flowmeter/Regulator, .030/.035" Steel Drive Roll (Comes Preinstalled in the Pro Pulse 220 MTS; If You Select the 26 Series Gun f/Welding Aluminum, You Also Get the .030/.035" Aluminum Drive Roll)
Does Not Include:
Welding Cart, Gas Bottle, MIG Gun Consumables/Parts (Except Those That Come Preinstalled on the Gun), MIG Welding Wire
Back In Stock!
The Pro Pulse™ 220 MTS—a multi-process machine capable of MIG, synergic MIG, synergic pulsed MIG, DC TIG, and Stick—offers a manual mode as well as 22 synergic programs, both with and without pulse, giving you the advantage of a virtually spatter free weld! Parameter selection on pulsed process welders can be complex, but the Pro Pulse 220 MTS features synergic technology, making parameter selection more intuitive and automatic. In fact, the Pro Pulse 220 MTS, with its three-step process, makes setup a breeze and gets you welding in minutes—simply select your process, wire diameter, and material thickness during automated setup. The 8 square inch LCD featured on the Pro Pulse 220 MTS adds to setup simplicity by telling you which gas your application requires; the LCD also enables you to easily view and adjust your weld parameters.
The Pro Pulse 220 MTS also offers ST-arc. The ST-arc function reads welding parameters back to the welding machine live (while welding), and monitors and keeps the arc length constant, while allowing the stick-out (contact tip to work distance) to vary. ST-arc, essentially, allows the new welder to focus on the location of the weld, as well as the travel speed, and also allows the experienced welder to keep a perfectly uniform bead and uniform heat input, which enables the welder to achieve good welds in tight corners—a feat that couldn't be reached previously with conventional welding equipment.
The Pro Pulse 220 MTS also allows you to set and store up to 30 different weld jobs, and with the Trigger Job function, you can apply three of the 30 different weld jobs to the welding gun trigger—simply depress the trigger to call up each job. Essentially, with the Pro Pulse 220 MTS, you get multiple, highly specialized MIG welders in one compact and light-weight package. And with the addition of a TIG welding torch and remote control, the versatile Pro Pulse 220 MTS also functions as a lift-arc, DC TIG welder.
Here at HTP, we pre-programmed the Pro Pulse 220 MTS with 22 synergic programs (both pulse and non-pulse) and one classic, fully manual program, each geared toward welding applications using mild steel, aluminum, stainless steel, silicon bronze, or flux-cored wires.
Pulse welding on mild steel gives you excellent penetration, due to the extremely hot spray arc, and also gives you perfect puddle control for both in- and out-of-position welding. Remarkably, the Pro Pulse 220 MTS, when used on clean material, provides a virtually spatter free weld—from start to finish—which results in a very smooth bead appearance, with no need for cleanup.
You can also weld aluminum with or without pulse. Our advanced, synergic programs and the Swiss-made wire feed assembly featured on the Pro Pulse 220 MTS enable you to feed aluminum wire with repeatable precision through our standard MIG welding gun. The ability to maintain a stable and smooth arc at 22 amps allows you to weld aluminum as thin as 1/32" (0.031"). Our pre-programmed Double Pulse program allows you to make "MIG like TIG" welds with the desired "stack of dimes" look. And for all welders who are in a hurry and never have time to preheat aluminum, the Pro Pulse 220 MTS features a built-in hot start function, which lets you set a predetermined amount of time that you weld at a hotter setting before switching back to your standard setting. We also incorporated a crater fill function for aluminum welding, which minimizes crater cracks in your welds. Since 4043 and 5356 aluminum alloys feed and weld differently, the Pro Pulse 220 MTS comes set up with programs for both.
In addition to mild steel and aluminum, we also included programs that allow you to pulse weld stainless steel. Again, pulse welding stainless steel provides nearly spatter free welding. We also included the option to adjust pre- and post-flow gas, as well as slope down for MIG, which allows your stainless welds to turn out "like TIG".
And for those who weld galvanized steel or sheet metal, we included a silicon bronze program that allows you to weld silicon bronze with a pulsed spray arc. A pulsed spray arc enables you to weld galvanized steel or sheet metal without melting the zinc coating or without distorting the sheet metal. Lastly, we included gas-less flux-cored programs, as well as gas shielded flux-cored programs for your structural welding and fabrication needs. A simple polarity reversal on the front of the machine allows you to weld using flux-cored wire without shielding gas. You also want to reverse polarity for TIG welding.
A light-weight design makes the Pro Pulse 220 MTS the ideal MIG for use both in the workshop and on the job site, and the multi-process nature of the machine offers nearly endless possibilities when welding.
Please note: We test all 26 Series MIG guns for welding aluminum prior to shipment so you may notice slight signs of wear or use.
|Input Voltage||230V (208 to 240V)|
|Input Amperage||MIG: 35A
TIG & Stick: 40A
|Maximum Output Amperage||200A (220A f/10 seconds)|
|Minimum Output Amperage||MIG: 12A
TIG & Stick: 4A
|Maximum Recommended Thickness
*Single pass capacity varies depending on the material being welded and the settings of the machine.
|1/4" to 3/8"|
|Duty-Cycle||35% @ 200A (77º F)
100% @ 140A (77º F)
25% @ 200A (104º F)
60% @ 140A (104º F)
100% @ 120A (104º F)
|Arc Voltage||13 to 35V|
|Open Circuit Voltage||75V|
|Electronic Overload Protection||Yes|
|Cooling (On-demand, electric fan, variable speed)||Fan (Forced Air)|
|Wire Spool Capability
*Up to a 44 Lb. weight capacity; 8" spools recommended for double pulse aluminum welding.
|8" and 12"|
*Depends on the material being welded (not all wire can be welded in all sizes).
|.023" to .045"|
|Wire Feed Rate (In./Min.)||55 to 630 IPM|
|Dimensions (Length x Width x Height)||19-3/4" x 10" x 14-1/2"|
*Without wire and cables.
CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Wish I had bought this sooner
The welder welds smooth as silk with little to no spatter. Awesome!!
Excellent Product, Excellent Customer Service
This is a quality welder, from a company focused on customer satisfaction. You will not regret purchasing this machine.
We have atypical applications for this welder. We do heavy equipment welding and run Lincoln NR212 in .045. We have to use manual settings but this welder handles it beautifully. We can keep the voltage lower which helps this wire weld cleanly and has an amazing clean stable arc. We haven't overheated it running 15' of bead at 160 amps. The unit is light, but can handle 12" roles of wire, expanding your options for types of wire. More importantly, they have a technician who called me to walk me through running the .045. He was full of good advice because he actually welds for a living. I am going to buy another fir our job trailer so my guys can weld with ease and confidence.
Pro Pulse 220 MTS review
So far I am loving the capability of the machine as well as the ability to dial in various welding parameters not usually found on a machine at this price point. Overall very satisfied with the machine. Only time will tell as to how long it will last but I am confident it will be good for many years to come.
I have had my Pro Pulse 220 for over a year.
Having had the Pro Pulse 220 and used it for over a year now, I am very pleased. I use it mainly for aluminum and it does just fine. I have another welder with a spool gun and another with straight mig aluminum, but I much prefer using the Pro Pulse for aluminum. I bought both mig guns the 24 and 26. I also bought the two spare kits for each gun and extra tips. Glad I did and you should too. Buy the good stuff in the beginning and you won't be disappointed. I also use the Pro Pulse for spray mig with 90/10 gas and it truly makes great welds up and down, no dripping welds. It is easy to use and set up. With aluminum you just have set tension very light and adjust the trim voltage and away you go. I live in Canada and there are no dealers for HTP so I have to rely on shipping from the USA and HTP has been spot on with deliveries and when I do need supplies I am sure they will deliver promptly. Thanks HTP .