The HTP MIG 2000i is offered in two accessory package options: MIG2000i-15 & MIG2000i-24
(check out the Accessory Package tab for more info)
Does Not Include:
Welding Cart, Gas Bottle, MIG Gun Consumables/Parts (Except Those That Come Pre-installed on the Gun), MIG Welding Wire
Great Scott!!! HTP is moving full speed ahead at 88 mph. "88 miles per hour!" of course, you might think that this is a little slow by today's standards. Lots of factory sports cars these days easily have 500hp in some cases way more!
A lot of our customers have a nostalgic soft spot in their hearts for the old transformer welders. They feel like all of these new screens, menus and buttons are more of a hinderance than a help to the operator.
If you feel the same way, then the HTP Mig 2000i is the machine for you!
HTP Mig 2000i
This unit is modeled after the classic transformer machines of the past. One dial for wire speed and one dial for voltage. Don't get mad, but we had to at least give it a basic digital readout for accuracy. NO fancy screens, NO hidden menus or fancy synergic functions that you almost have to have a degree in computer science to operate.
The HTP MIG 2000i is a MIG only welder, NOT a multi process machine. Just a basic “good old Mig”. We know you will love and appreciate this “classic” approach to welding. Under the hood you will find that the big old transformer had to go. Even though everyone loves dinosaurs and transformer Mig machines-BOTH are now extinct! In its place you will find a modern, small, lightweight and energy efficient high-tech inverter. Designed and built in Italy by STEL, this unit performs like no other!
It will surprise you how smooth and virtually spatter free you can weld with a small machine like this. Powerful “late model technology” in a small package. "You bet your a** it works!" -Marty McFly.
If you have access to 220/240 Volt and you want more from your welding machine then add the new HTP Mig 2000i to your line up. Great design and performance inside and out with 200 Amp max output, pure simplicity.
| Input Voltage | 230 to 240V |
| Input Amperage max @ 230 / 240 | 35.2 Amp / 33.7 Amp |
| Input amperage effective current | 15.8 Amp / 15.2 Amp |
| Maximum Output Amperage MIG | 200 Amp |
| Minimum Output Amperage MIG | 20 Amp |
| Maximum Recommended Thickness *Single pass capacity varies depending on the material being welded and the settings of the machine. | 1/4” |
| Duty-Cycle MIG on 20A (or higher) fuse/breaker @ 104F | 25% @ 180A 60% @ 120A 100% @ 100A |
| Arc Voltage (Mig) | 13 to 30V |
| Open Circuit Voltage | 70V |
| Electronic Overload Protection | Yes |
| Cooling (On-demand, electric fan, variable speed) | Fan (Forced Air) |
| Wire Spool Capability | 8" |
| Wire Diameter *Depends on the material being welded (not all wire can be welded in all sizes). | .024" to 3/64" |
| Frequency | 50/60 Hz |
| Wire Feed Rate (In./Min.) | 55 to 630 IPM |
| Dimensions (Length x Width x Height) | 20" x 9" x 14" |
| Weight *Without wire and cables. | 35.3 lbs |
Downloads/Manuals
The HTP Mig 2000i is offered in two packages:15 Series or 24 series. See package details below:
The HTP MIG 2000i-15 package includes the following items:
The HTP MIG 2000i-24 package includes the following items:
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov.Rates from 0% APR or 10-36% APR. Payment options through Shop Pay Installments are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. State notices to consumers affirm.com/licenses.
Owner’s Manual