Your choice of torch, 10ft ground clamp, 220v to 110V adapter cord
Does Not Include:
Welding Cart and Air Dryer
The MicroCut 45 DV is the newest machine added to the HTP lineup. What is new about this machine? CNC capabilities come standard, Dual Voltage machine, lighter weight, and an LCD Display!
*Please select what torch you would like below. You can choose from a hand cutting torch or CNC machine torch below.*
We have thoroughly tested the MicroCut 45 DV on its precision and duty cycle. While running on 220V it will output a maximum 45 amps; on 110V it will output 25 amps. This machine is not approved for use with a generator. Hand cutting or CNC cutting this machine is sure to meet your expectations. Maximum severance cutting capacity is 1 inch, maximum quality cutting is 3/4".
With the MicroCut 45 DV, the maximum rated CNC pierce capacity is 1/2"; the cut speed at 1/2" material thickness runs at 16 IPM. To use your MicroCut 45 DV on your plasma table, simply install your CNC machine torch, plug in your table, and switch the cutter into CNC mode. The MicroCut 45 DV DOES NOT include the 14-Pin Mating Connector (P/N 64672).
**NOT APPROVED FOR USE WITH GENERATOR**
The MicroCut 45 DV packs powerful performance into a lightweight design. Thick or thin, the MicroCut 45 DV gets the job done! Backed by a 2-year warranty and a 30-day money back guarantee.
To get the best cutting capacity, fastest cutting speeds, and longest consumable life out of your CNC plasma cutting applications, we highly recommend using our HTP Max Dry desiccant air dryer system (P/N 25310-2). Dry air is a necessity when running a CNC with a torch height controller.
For torch consumables/parts, please visit the following page: MicroCut 45 DV Hand and Machine Torches and Parts.
If you would like to purchase a hand torch, in addition to the machine torch, please visit the following page: MicroCut 45 DV Hand Torch.
| 220V | 110 V | |
| Input Voltage | 230V | 120V |
| Input Amperage | 45A | 30A |
| Cutting Current | 20 to 45 A Infinitely Variable | 20 to 25 A Infinitely Variable |
| Open Circuit Voltage | ||
| Cutting Voltage | 230V | |
| Maximum CNC Cutting Capacity | ½" @ 16 IPM | |
| Quality Cutting Capacity | ¾" @ 6.5 IPM | |
| Severance Cutting Capacity | 1" @ 4 IPM | |
| Duty-Cycle (104 F) | 50% @ 45A 100% @ 32 A | 40% @ 25 A 60% @ 27 A 100% @ 21 A |
| Weight | 29 Lbs. | |
| Dimensions (Length x Width x Height) | 18-3/4" x 6-¾" x 12-½" | |
| Cutting Torch Length | 20' | |
| Ground Length | 10' | |
| Input Power Cord Length | 9' | |
| Plasma/Cooling Gas Pressure | 70 PSI | |
| Plasma/Cooling Gas Volume | 3.5 CFM |
Downloads/Manuals
The HTP Micro Cut is available in three packages:
Hand torch Package
The Hand torch package comes with the 20' hand torch, 10' ground clamp assembly and the 110/220 adapter cord.
Machine Torch Package
The Machine torch package comes with the 20' machine torch, 10' ground clamp assembly and the 110/220 adapter cord (machine comes with CNC board already installed)
Both Torches
This package comes with both the 20' hand torch and machine torch, 10' ground clamp assembly and the 110/220 adapter cord (machine comes with CNC board already installed)
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov.Rates from 0% APR or 10-36% APR. Payment options through Shop Pay Installments are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. State notices to consumers affirm.com/licenses.
Owner’s Manual