MIG Welders
Includes:

The HTP Revolution 2500 is offered in four different accessory package options:

Steel, Aluminum, All in and now Water Cooled TIG (check out the Accessory Package tab for more info)


Does Not Include: 
Welding Cart, Gas Bottle, MIG Gun Consumables/Parts (Except Those That Come Preinstalled on the Gun), MIG Welding Wire

Revolution 2500

Product # REV2500STEEL
  • Regular priceList
    $5,999.00

  • Our Price:
  • $3,999.00


  • You Save: $2,000.00 !



Financing as low as

$132/mo


Apply Now!
Product Videos:

Revolution 2500:

Designed by welders for welders!  We listened and built the world’s first TRUE PULSE multi process welder. This machine will revolutionize how America welds! Don’t waste any more time on setup or rework. Have everything you need always available at your fingertips.  Arc dynamic, efficiency, precision, and superiority in all ways imaginable.

HTP is proud to present the HTP Revolution 2500. This machine is not only the leader in its class, it has created a class of its own!

 

    • MIG and Pulse MIG (synergic MIG, single pulse, and double pulse)
    • Aluminum Pulse MIG in either single or double pulse
    • Steel Pulse MIG -Single and Double Pulse-only available for .030 steel wire.
    • AC/DC TIG, Pulse and AC TIG with different wave forms.
    • High Frequency TIG
    • Stick and Pulse Stick with programs for: 7018, 6013, 6011
    • Dual Voltage 110/220Volt with PFC and very low power consumption.
    • 250 Amps max output
    • Automatic Polarity Reversal (you never need to change polarity)
    • A full Manual MIG mode and a door chart
    • Backed by HTP customer service and support
    • Maximum portability, works on a 15 or 20 amp 110 volt circuit
    • For maximum output only a 30 amp 220 volt circuit is required



All the features you always wanted to see in one machine … here they are:

A full TIG machine with features such as; AC and DC, High Frequency start, both AC and DC pulse, 2 AC waveforms (square and triangular wave), Balance and frequency adjustment, up to 400 Hz*. Not only does this machine have an outstanding arc dynamic that rivals dedicated TIG machines from big name brands; it also has a low starting current and 250 amp max output. This machine is fully customizable with an air cooled or water cooled CK TIG torch (always super flex cables) and your choice of foot pedal, momentary switch, slider, or rotary control. This is not a compromise like a “Jack of all trades – Master of none” kind of deal… this is the real deal!

A full featured MIG machine. Not only is there an “old school” manual MIG program and a door chart for the few of us that are not ready to dive in headfirst. There is also a large variety of synergic programs for different wires, gases, and applications available. Let’s start with the “classic MIG wire”, so you want to weld it with 75/25 gas or with 100% co2? What diameter? Simply dial in the material thickness on the new advanced operator’s interface on the display and you are good to go! You want to weld stainless, and you have tri mix gas? No problem! This machine has the programs for that built in. Are you doing stainless steel production welding and you don’t want to spend your money on expensive tri mix gases? No problem! We have  the 98/2 program for that too! Welding in the field using gasless wires in .035 or .045 diameter? We have you covered! This machine will automatically internally reverse polarity when you select the matching program. Want to weld aluminum? Sure! With or without pulse? SURE! With manual double pulse? SURE! The possibilities seem endless! You can feed your aluminum wire through the 9' MIG gun or add the 25' spool gun.

A Stick and pulse stick welder with programs specifically tailored for 7018, 6013 and 6011 rods. Full manual modes; you pick your amperage, hot start, arc force and pulse parameters. Or use our guided Easy Set™ system that keeps you in the weldable range of parameters.

And there is so much more, if we have your attention now, pick up the phone and talk to our knowledgeable salespeople who all enjoyed hands on training on this machine and know how to weld with it!

*up to 99 amps, 200 Hz above that

Please note for maximize portability this machine only uses the 8" inch rolls of wire.  

The Revolution 2500 can be used with a Spool gun part# RSG258-PP300 you will also need the spool gun board part# 601855.  The Revolution 2500 does not work with the push pull gun option.

 

The Revolution 2500 Specifications:

Input Voltage

120V

208 to 240V

Input Amperage max @ 208/ 240

15A (15A fuse)

30A (20 A fuse)

34.6Amp / 30 Amp

Input amperage effective current

15A (15A fuse)

19.3A (20A fuse)

17.9Amp / 15.5Amp

Maximum Output Amperage TIG

90A (15A fuse)

150A (20A fuse)

250 Amp

Maximum Output Amperage MIG

75A (15A fuse)

120A (20A fuse)

220 Amp

Maximum Output Amperage Stick

60A (15A fuse)

110A (20A fuse)

200 Amp

Minimum Output Amperage TIG AC or DC

5 Amp

Minimum Output Amperage MIG

13 Amp

Minimum Output Amperage Stick

10 Amp

Maximum Recommended Thickness
*Single pass capacity varies depending on the material being welded and the settings of the machine.

1/8”

1/4" to 3/8"

Duty-Cycle TIG on 20A (or higher) fuse/breaker @ 104F

40% @ 150A

60% @ 120A

100% @ 110A

20% @ 250A

60% @ 160A

100% @ 130A

Duty-Cycle MIG on 20A (or higher) fuse/breaker @ 104F

40% @ 120A

60% @ 110A

100% @ 90A

25% @ 200A 
60% @ 140A 
100% @ 120A

Duty-Cycle STICK on 20A (or higher) fuse/breaker @ 104F

40% @ 110A

60% @ 90A

100% @ 75A

25% @ 200A 
60% @ 140A

100% @ 120A

Arc Voltage (Mig)

13 to 35V

Open Circuit Voltage

75V

Electronic Overload Protection

Yes

Cooling (On-demand, electric fan, variable speed)

Fan (Forced Air)

Wire Spool Capability

8"

Wire Diameter *Depends on the material being welded (not all wire can be welded in all sizes).

.023" to .045"

Frequency

50/60 Hz

Wire Feed Rate (In./Min.)

55 to 630 IPM

Dimensions (Length x Width x Height)

21" x 11-3/4" x 16-1/2"

Weight *Without wire and cables.

86 lbs

 

Revolution 2500 Programs

 

 

 

Downloads/Manuals

  Owner’s Manual

The Revolution 2500 Accessory Packages:

The HTP Revolution 2500 is offered in four different accessory packages: Steel, Aluminum, "All in"  and now the Water Cooled Tig Package.  See package details below:

 

The Revolution 2500 Steel package includes the following items:

  1. HTP 24100, 24 SERIES MIG Gun for Steel, EURO QUICK DISCONNECT, 10' (Part# 24100): This is a MIG gun specifically designed for steel welding and comes with a quick disconnect feature.
  2. Victor Flow Gauge Regulator: This regulator is used to control the flow of gas during the welding process.
  3. Gas hose (part# tighoseusa) for gas bottle connection: This hose is used to connect the welding machine to the gas bottle for TIG welding.
  4. 10' Ground cable and clamp with 35 Dinse connection (part# AO-21041): This 10' cable and clamp are used to establish a grounding connection for safe and efficient welding.
  5. 12' foot pedal (part#60300fp-12.5): The 12' foot pedal is used to control the welding current while performing TIG welding.
  6. 12' CK17 TIG Torch, 35 Dinse (part# 1712-35d-14b): This TIG torch is compatible with the Revolution 2500 and comes with a 35 Dinse connection.
  7.  Includes steel drive roller for .030/035 (part# 63162) already in machine.

   **Please note that the TIG torch does not include any consumables and that you will need at minimum additional contact tips for the MIG Guns.

 

 The Revolution 2500 Aluminum package includes the following items:

  1. HTP 25090, 9' 25 SERIES MIG Gun for Aluminum, EURO QUICK DISCONNECT (Part #25090): This is a MIG gun specifically designed for aluminum welding and comes with a quick disconnect feature.
  2. Victor Flow Gauge Regulator: This regulator is used to control the flow of gas during the welding process.
  3. Gas hose for tank connection (part# tighoseusa): This hose is used to connect the welding machine to the gas tank for TIG welding.
  4. 10' Ground cable and clamp with 35 Dinse connection (part# AO-21041): This cable and clamp are used to establish a grounding connection for safe and efficient welding.
  5. 12' foot pedal (part# 60300fp-12.5): The foot pedal is used to control the welding current while performing TIG welding.
  6. 12' CK17 Tig Torch, 35 Dinse (part# 1712-35d-14b): This TIG torch is compatible with the Revolution 2500 and comes with a 35 Dinse connection.
  7. 110/220 Adapter cable (515P650R18) 18” adapter cord
  8. Aluminum Drive roller part# 63464 .035/.045 -1.0/1.2 
  9. Incudes steel drive roller for .030/035 (part# 63162) already in machine.

   **Please note that the TIG torch does not include any consumables and that you will need at minimum additional contact tips for the MIG Guns.

 

 The Revolution 2500 ALL In package includes the following items:

  1. HTP 24100, 10' 24 SERIES MIG Gun for Steel, EURO QUICK DISCONNECT (Part# 24100): This is a MIG gun specifically designed for steel welding and comes with a quick disconnect feature.
  2. HTP 25090, 9' 25 SERIES MIG Gun for Aluminum, EURO QUICK DISCONNECT (Part# 25090): This is a MIG gun specifically designed for aluminum welding and comes with a quick disconnect feature.
  3. Aluminum Drive Roller (part# 63464) -1.0 for .035 and 1.2 for .045: This drive roller is marked with an "A" for aluminum and is compatible with .035"-.040" and .045" aluminum wire.
  4. Steel Drive roller for .030/.035 part# 63162)comes installed in the machine.
  5. Knurled Drive Roller (part# 63498): Drive roller for flux core or dual shield wire.
  6. Two Gas Hoses (part# tighoseusa): These hoses are used for both MIG & TIG welding applications.
  7. Victor Flowmeter (part# 07819411): Use the Victor flowmeter for your MIG Set up.
  8. Flowmeter for Argon (part# 12020-F): This flowmeter is specifically designed for measuring the flow of argon gas, commonly used in TIG welding.
  9. 12’ Foot Pedal (part# 60300P-FP-12): The foot pedal is used to control the welding current while performing TIG welding
  10. Heavy Hitter Flex Head Torch with HTP connection (part# 2612HH-35d-14B): This torch features the Heavy Hitter flexible torch head and CK Worldwide super flex power cable and is designed to work with the Revolution 2500. It uses the HTP dinse connection.
  11. Electrode holder (part# 22315-arc), 15 foot #2 cable, 35 dinse: This stick electrode holder and cable are used for holding and connecting the welding electrode during the welding process.
  12. Ground clamp and cable assembly (AO-21041): 10’ assembly with #2 cable and 35 Dinse connection.
  13.  110/220 Adapter cord (part# 515P650r18) 18” adapter cable. 

     

The Revolution 2500 Water Cooled TIG with both MIG Guns includes the following items:

  1. HTP Dual Voltage Arctic Chill Cooler (Part# AC5460-DV)
  2. 2 Gallons of coolant for the Arctic Chill Cooler (Part# Coolant-30)
  3. CK20 Series Water Cooled Rigid neck TIG torch with HTP connection (part# 2012-35d-14B).
  4. 12’ Foot Pedal (part# 60300P-FP-12): The foot pedal is used to control the welding current while performing TIG welding.
  5. HTP 24100, 10' 24 SERIES MIG Gun for Steel, EURO QUICK DISCONNECT (Part# 24100): This is a MIG gun specifically designed for steel welding and comes with a quick disconnect feature.
  6. HTP 25090, 9' 25 SERIES MIG Gun for Aluminum, EURO QUICK DISCONNECT (Part# 25090): This is a MIG gun specifically designed for aluminum welding and comes with a quick disconnect feature.
  7. Aluminum Drive Roller (part# 63464) -1.0 for .035 and 1.2 for .045: This drive roller is marked with an "A" for aluminum and is compatible with .035"-.040" and .045" aluminum wire.
  8. Steel Drive roller for .030/.035 part# 63162) comes installed in the machine.
  9. Knurled Drive Roller (part# 63498): Drive roller for flux core or dual shield wire.
  10. Two Gas Hoses (part# tighoseusa): These hoses are used for both MIG & TIG welding applications.
  11. Victor Flowmeter (part# 07819411): Use the Victor flowmeter for your MIG Set up.
  12. Flowmeter for Argon (part# 12020-F): This flowmeter is specifically designed for measuring the flow of argon gas, commonly used in TIG welding.
  13. Electrode holder (part# 22315-arc), 15 foot #2 cable, 35 Dinse: This stick electrode holder and cable are used for holding and connecting the welding electrode during the welding process.
  14. Ground clamp and cable assembly (AO-21041): 10’ assembly with #2 cable and 35 Dinse connection.
  15. 110/220 Adapter cord (part# 515P650r18) 18” adapter cable.   

 

**Please note that the TIG torch does not include any consumables and that you will need at minimum additional contact tips for the MIG Guns

 

 Please note: We test MIG guns for welding aluminum prior to shipment so you may notice slight signs of use.


CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Customer Reviews
5.0 Based on 4 Reviews
5 ★
100% 
4
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
RI
07/22/2024
Ryan I.
United States United States

Pretty darn nice

I have had my machine a few weeks now and used it every day since. It helped me finish a project that my Chinese machine was floundering on. In the MIG function the preset settings are hot and make a person move quickly. I have been really enjoying the TIG function. I have been running beads daily, practicing. I have yet to use the MMA function, but it it is anything like the MIG and TIG I am sure it will be great. This machine is better than I am a welder. As a home hobbiest type, a pro could probably give you a better evaluation than I. That being said this welder will probably be the last machine I ever own.

RM
06/15/2024
Rich m.
United States United States

rev 2500

The machine itself has been amazing, super easy to use and has every process and technology i could ever need. Peter was amazing in the sales process in informing me on everything about the machine and answering all my questions. Couldnt recommend HTP more!

R
06/15/2024
RICH
United States United States

Rev 2500

The machine itself is awesome. easy to use and has everything i could ever need. Peter was awesome helping inform me on the machine and every step along the way went above and beyond to make sure the process was smooth. couldnt recommend HTP more

AM
03/26/2024
Adam M.
United States United States

Revolution 2500

I am in love with the new Revolution Machine. This machine is super user friendly, easy to navigate and has far more functions than you will ever need. This machine out of the box made me a better welder and is by far the nicest, smoothest thing I have put my hands on. Will definitely be a life long HTP customer.

Rates from 0% APR or 10-36% APR. Payment options through Shop Pay Installments are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. State notices to consumers affirm.com/licenses.