| Part Number | Description | Quantity |
| 15023 | .023" Contact Tip | 6 |
| 15030 | .030" Contact Tip | 6 |
| 15035 | .035" Contact Tip | 3 |
| 15104 |
Cylindrical Nozzle |
2 |
| 15105 | Conical Nozzle | 2 |
| 15106 | Spot Weld Nozzle | 2 |
| 15108 | Super Taper Conical Nozzle | 2 |
| 13002-DLT | Gas Diffuser | 1 |
| 15062 | Nozzle Retaining Spring | 4 |
| 12025 | Nozzle Reamer | 1 |
| 12026 | Wire Cleaner | 1 |
| TW | Tip Wrench | 1 |
CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov.
Love the mig gun but whats up with the supplied o-rings
I received my HTP flex neck my gun from my snap on MM250SL welder with the consumables and was excited because it looks great. However, when I hooked it up to my welder, there was a serious gas leak at the wire feed connection. I tracked the problem down to the O-rings that were supplied with the mig gun being too small to seal to the wire feed assembly in the welder. They appeared to be at least .001th or more too small. I was able to swap out the brownish red O-rings for some green O-rings. I have for my automotive air-conditioning stuff and the gas leak was mostly eliminated. I emailed the company to find out why the O-rings which are supplied which is small, but I never got a response. I also noticed that the gas diffuser that was installed on the flex neck does not appear to match the gas diffuser installed in the box of consumables also, I attempted to unscrew the gas diffuser on the flex neck and it is either extremely tight or not meant to be replaced because the neck begin to twist long before the guest diffuser would unscrew. Being able to talk to somebody at HTP would be extremely helpful. However, I have not been successful in getting through to anyone and my emails are not returned
United StatesConsumables
Everything worked great,but it was a little pricey.
United StatesUp grade
it's been one of my best purchases over the years, my 140 Mig is over 20 years old and never had a real issue with it. Not used everyday but has been part of probably 20 cars restored or built from scratch cars. Made in the USA
United StatesMiG consumables
Everything that I have ever purchased from HTP has been Spot On! Mark P.
United StatesGood Kit
Everything works as it should -- quality construction
Rates from 0% APR or 10-36% APR. Payment options through Shop Pay Installments are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. State notices to consumers affirm.com/licenses.