Made in the U.S.A.!
A premium flux-cored, dual-shielded, seamless, tubular, and copper cladded wire.
Set the wire speed to 250 IPM
Set the arc voltage to 24-25 Volts
Use 75/25 gas at about a 40-50 CFH flow rate
The contact tip to work distance should be about 3/4" (no more than 1")
If you set everything correctly, the amperage reading in the display should be about 160-170 amps.
The above settings work for in-position welds and also for out-of-position vertical up and overhead welds. The above settings are used during AWS D1.1 state certification tests and, if executed properly in multiple passes, can make sound welds on materials of unlimited thickness.
Some of the best dual shield wire I have ever used, almost no spatter and slag comes off with a light tap