Please see the Accessory Package tab for more information on what is included in this package.
Does NOT Include: Welding Cart or Gas Bottle
Financing as low as
$86/mo
ORDER NOW SO YOU DONT MISS OUT!! PLEASE NOTE THAT YOUR ORDER WILL SHIP TOWARDS THE END OF JANUARY.
HTP Freedom 235 Pulse - Collision Repair Package
Have a certification coming up for 1.0 /1.2mm 5356 or 5554 Aluminum? Or are you in need of a machine for MIG Brazing Silicon Bronze? The Pro Pulse 220 Collision repair package has got you covered. This package has the current Pro Pulse 220 programs but adds 3 new programs: 4043 .040 Pulsed and PAW wire, 5356 .040 Pulsed and PAW programs and 5554 .040 Pulse and PAW programs. (Please note-you might need to pick up an extra roll of wire as back up for the test)
The HTP Freedom 235P —a multi-process machine capable of MIG, synergic MIG, synergic pulsed MIG, DC TIG, and Stick—offers a manual mode as well as pre programmed synergic programs, both with and without pulse, giving you the advantage of a virtually spatter free weld! Parameter selection on pulsed process welders can be complex, but the Freedom 235 P features synergic technology, making parameter selection more intuitive and automatic. In fact, the Freedom 235P, with its three-step process, makes setup a breeze and gets you welding in minutes—simply select your process, wire diameter, and material thickness during automated setup. The 8 square inch LCD featured on the Freedom 235P adds to setup simplicity by telling you which gas your application requires; the LCD also enables you to easily view and adjust your weld parameters.
Pulse welding on mild steel (only available for .030 wire) gives you excellent penetration, due to the extremely hot spray arc, and also gives you perfect puddle control for both in- and out-of-position welding. Remarkably, the Pro Pulse 220 MTS, when used on clean material, provides a virtually spatter free weld—from start to finish—which results in a very smooth bead appearance, with no need for cleanup.
You can also weld aluminum with or without pulse. Our advanced, synergic programs and the Swiss-made wire feed assembly featured on the Freedom 235P enables you to feed aluminum wire with repeatable precision through our standard MIG welding gun. The ability to maintain a stable and smooth arc at 22 amps allows you to weld aluminum as thin as 1/32" (0.031"). Our pre-programmed Double Pulse program allows you to make "MIG like TIG" welds with the desired "stack of dimes" look. And for all welders who are in a hurry and never have time to preheat aluminum, the Freedom 235P features a built-in hot start function, which lets you set a predetermined amount of time that you weld at a hotter setting before switching back to your standard setting. We also incorporated a crater fill function for aluminum welding, which minimizes crater cracks in your welds. Since 4043 and 5356 aluminum alloys feed and weld differently, the Freedom 235P comes set up with programs for both.
In addition to mild steel and aluminum, we also included programs that allow you to pulse weld stainless steel. Again, pulse welding stainless steel provides nearly spatter free welding. We also included the option to adjust pre- and post-flow gas, as well as slope down for MIG, which allows your stainless welds to turn out "like TIG".
And for those who weld galvanized steel or sheet metal, we included a silicon bronze program that allows you to weld silicon bronze with a pulsed spray arc. A pulsed spray arc enables you to weld galvanized steel or sheet metal without melting the zinc coating or without distorting the sheet metal. Lastly, we included gas-less flux-cored programs, as well as gas shielded flux-cored programs for your structural welding and fabrication needs. A simple polarity reversal on the front of the machine allows you to weld using flux-cored wire without shielding gas. You also want to reverse polarity for TIG welding.
A light-weight design makes the HTP FREEDOM 235P the ideal MIG for use both in the workshop and on the job site, and the multi-process nature of the machine offers nearly endless possibilities when welding.
Please note: We test all 25 Series MIG guns for welding aluminum prior to shipment so you may notice slight signs of wear or use.
| Input Voltage | 230V (208V-240V) |
| Input Amperage | MIG: 35A |
| Maximum Output Amperage | 200A (220A f/10 seconds) |
| Minimum Output Amperage | MIG: 12A |
| Maximum Recommended Thickness *Single pass capacity varies depending on the material being welded and the settings of the machine. | 1/4" to 3/8" |
| Duty-Cycle | 35% @ 200A (77º F) 100% @ 140A (77º F) 25% @ 200A (104º F) 60% @ 140A (104º F) 100% @ 120A (104º F) |
| Arc Voltage | 13 to 35V |
| Open Circuit Voltage | 75V |
| Electronic Overload Protection | Yes |
| Cooling (On-demand, electric fan, variable speed) | Fan (Forced Air) |
| Wire Spool Capability *Up to a 44 Lb. weight capacity; 8" spools recommended for double pulse aluminum welding. | 8" and 12" |
| Wire Diameter *Depends on the material being welded (not all wire can be welded in all sizes). | .023" to .045" |
| Frequency | 50/60 Hz |
| Wire Feed Rate (In./Min.) | 55 to 630 IPM |
| Dimensions (Length x Width x Height) | 19-3/4" x 10" x 15-1/2" |
| Weight *Without wire and cables. | 42 Lbs. |
Downloads/Manuals
The HTP Freedom 235 Pulse - Collision Repair Package includes the following items:
Please note that this package does not include a welding cart.
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov.Rates from 0% APR or 10-36% APR. Payment options through Shop Pay Installments are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. State notices to consumers affirm.com/licenses.
Owner’s Manual
Video Manual