15 Series (180A) Flex Neck MIG Gun, w/4-Pin Amphenol Trigger Connection, f/Select Eastwood®, LINCOLN®, Longevity®, & MATCO® Welders

15 Series (180A) flex neck MIG gun with a 4-pin Amphenol trigger connection (only two pins used, though) for the following Eastwood®, LINCOLN®, Longevity®, and MATCO welders: 

Eastwood® MIG 135 (2014 or Older) and MIG 175 (2014 or Older);

Please note: If you are using a 2014 or newer Eastwood Mig welder and the trigger connector is male and silver in color you will need to buy the trigger connection and install-PLEASE CALL IN TO ORDER THIS OPTION

LINCOLN® EasyMIG 140, EasyMIG 180, Easy-Core 125, MIG-PAK 140, MIG-PAK 180, POWER MIG 140C, POWER MIG 140T, POWER MIG 180 Dual, POWER MIG 180C, POWER MIG 180T, POWER MIG 210 MP, PRO-CORE 125, PRO-MIG 140 (Except CODE 11128), PRO-MIG 180, SP-140T, SP-180T, WELD-PAK 125HD, WELD-PAK 140HD, WELD-PAK 180HD, and Work-Pak 125;

Longevity® MIGWELD 140 and MIGWELD 200S;

MATCO® MP140.

Uses HTP America® 15 Series consumables. To remove the gas nozzle, twist clockwise and pull. To install the gas nozzle, twist clockwise and push.  

The handle can be either red and black as shown or all black depending on availability.

Please Note: Do not bend the flex neck into a complete U-shape—the neck can crack.