Description:
EDGE® #15 gas lens Pyrex cup with 1/8" diffuser for 9 and 20 Series TIG torches. Cup measures 2" x 2" x 2".
EDGE Welding Supply Pyrex Cup Recommendations:
♦ The EDGE adapter and EDGE cup must be fully seated onto the Teflon heat/thermal shield.
♦ For use with DC only and up to 180A unless using pulse settings.
♦ Best used with metals such as Stainless Steel, Titanium, Inconel, Nickel based, and thin aluminum based.
♦ Recommended for use with 1/16", 3/32", and 1/8" tungsten. The 1/16" diffuser must not exceed 90A DC because of potential damage to the diffuser.
♦ The tungsten can be extended out of the cup, up to 3", for clearance in a controlled environment.
♦ The 'walking the cup' technique is not recommended with Pyrex cups (walking the cup causes premature cup failure).
EDGE Welding Supply Pyrex Cup Recommendations:
♦ The EDGE adapter and EDGE cup must be fully seated onto the Teflon heat/thermal shield.
♦ For use with DC only and up to 180A unless using pulse settings.
♦ Best used with metals such as Stainless Steel, Titanium, Inconel, Nickel based, and thin aluminum based.
♦ Recommended for use with 1/16", 3/32", and 1/8" tungsten. The 1/16" diffuser must not exceed 90A DC because of potential damage to the diffuser.
♦ The tungsten can be extended out of the cup, up to 3", for clearance in a controlled environment.
♦ The 'walking the cup' technique is not recommended with Pyrex cups (walking the cup causes premature cup failure).
a
![]()